ATS 100A Dual Power Automatic transfer switch

Performance characteristics
Conversion function: can automatically switch between two power supply, when the common power supply power failure, undervoltage, overvoltage, open phase, frequency offset, automatically switch the load to the standby power supply, in order to ensure the reliability and security of power supply, to achieve unattended continuous power supply. Some of the smarter ats 100A switches are faster and adjustable.
Protection function: Optional Dual Power Automatic Transfer Switch Controller, with three-phase protection and detection function, to the lower end of the load and cable to provide short circuit, overload and other protection. The control part is a metal shell, and the switch shell components are made of glass fiber unsaturated polyester resin, which has strong dielectric properties, protection ability and reliable operation safety.
Indication function: the panel can indicate the input and output power supply status, fault status, manual and automatic status, etc. . Also can save the history of the cycle, easy to query the time to save records, automatic manual conversion, failure causes, switching state, power parameters and other information.

Scope of application
Suitable for AC 50/60 Hz, 690V and below, rated current from 6a to 1250A and below two power supply (common power supply n and standby power supply or generator power supply R) in the power supply system. Widely used in fire, hospitals, banks, high-rise buildings and other important places do not allow power off the power transmission and distribution systems and automation systems.

Technical parameters
Rated current: 100A.
Rated insulation voltage: 6 kv.
Rated control voltage: AC 220V 50/60Hz
Rated operating voltage: AC400V/690V.
Transfer/return time: 2.5 s -3 s.
Life Electrical: 8000 times;
Mechanical Life: 3000 times.
Rated short-circuit current connection capacity: 8 ka.
Rated short-time withstand current: 5kA/30ms.
Form and installation
The overall design is usually small and sturdy, measuring 310 mm × 180 mm × 200 mm and weighing 3.5 kg. The installation method is screw installation, which can be installed in the distribution cabinet.