中文
Wifi Ats 125A, Automatic Transfer Switch 2P 3P 4P LMQ4-125W
LMS1-GA series Automtic transfer Switch Ats 100A
LMS1-NJT Series Automatic Transfer Switch Ats 63A
LMS1-MA Type PC Class Automatic Transfer Switch Ats 63A
Ats 100A,Automatic Transfer Switch 2P 3P 4P LMQ4-100X
LMS1-LA Series Automatic Transfer Switch ATS 100A
LMS1-GN Automatic Transfer Switch ATS 250A
LMS1-NA Series Automatic Transfer Switch ATS 630A
LMS1-LA3 Series PC Automatic transfer switch Ats 630A
LMS1-L Series Automatic Transfer Switch Ats 630A
LMS1-SA Series PC Automatic transfer switch
LMS1-SN Series Automatic Transfer Switch Ats 400A
LMS1-Q Type Automatic Transfer Switch Ats 3200A
LMS1-SN Automatic Transfer Switch Ats
LMS1-J Series Automatic Transfer Switch Ats 63A
LMQ2Y Series Automatic Transfer Switch CB Class
LMQ2CB Series Automatic Transfer Switch
LMQ3-W1 Automatic Transfor Switch Ats 63A
LMQ3-W1 Automatic Transfor Switch ats 630A
LMQ4-63M 63A Automtic transfer Switch 2P 3P 4P
LMGLZ1 Manual Transfer Switch (100~630A)
LMGLZ Manual Transfer Switch (100~630A) Changeover Switch
Y-700 Automatic Transfer Switch Controller
Y-701 Automatic transfer switch controller
Y-702 Automatic Transfer Switch Controller
Y-703 Automatic Transfer Switch Controller
W2、W3 Automatic Transfer Switch Plug-In Led Digital Controller
Customization-Automatic Transfer Switch Cabinet 100A Ats
Dual Power Supply Control Cabinet - Automatic Transfer Switch
Ats Cabinet - Automatic Transfer Switch
0102030405
LMS1-NJT Series 63A Automatic Transfer Switch ATS - Top China Suppliers & Factory Available
LMS1-LA Series Manual
LMS1-LA as our ingenuity research and development of a new generation of dual power automatic transfer switch, in the performance and technology to achieve a major breakthrough. The product provides 63A, 125A, 250A, 400A, 630A and other rated current specifications, whether it is the continuous operation of massive servers in data centers, or the uninterrupted power supply of life support equipment in hospital ICU wards, the stable operation of elevator and fire fighting system in high-rise buildings can fully meet the power demand in different scenarios.
Its switching speed can be called industry-leading, switching time only 10ms-50ms, with millisecond response speed to complete power conversion. In the data center, the LMS1-LA automatic transfer switch can switch to the standby power supply in a very short period of time in the face of sudden power failure, avoiding data loss and system collapse caused by momentary power failure; in the hospital environment, the LMS1-LA automatic transfer switch can switch to the standby power supply in a very short period of time, millisecond-level power switching can guarantee the stable operation of precision instruments and first-aid equipment in operating rooms, and escort the safety of patients. When applied to high-rise buildings, fast power changeover ensures smooth parking of elevators, normal operation of fire fighting systems and improved building Factor of safety.
The transfer switch is composed of a high performance excitation contactor and an intelligent controller. When working, the electromagnetic coil produces a strong and stable attraction to drive the switching action to ensure the instant completion of power switching. This feature not only effectively guarantees the rapid switching of the power supply when the equipment is powered off, but also realizes the seamless connection of the power supply, which provides a reliable and solid power guarantee for the equipment with strict requirements for power continuity.
LMS1-NJT series of household automatic transfer switch apparatus is the latest micro household power transfer switch developed and produced by our company. The switch belongs to PC CLASS lightweight transfer switch, Two positions structure. It is suitable for AC 50/60Hz and AC power distribution system of rated current 10A–63A. It is mainly used to detect whether the user's power supply is normal. When one power supply is abnormal, it switches to the other power supply immediately. Mechanical and electrical combination locks are used inside the switch to avoid simultaneous switching on of two lines, so as to ensure the continuity, reliability and safety of power supply.
Model Description
Normal Working Conditions
- 1 The operating environment temperature ranges from -5°C to +40°C, and the average temperature within 24 hours cannot exceed +35°C. The storage environment temperature ranges from -25°C to +55°C, and can reach +70°C within 24 hours.
- 2 The altitude of the installation site does not exceed 2000m.
- 3 The relative humidity of the air at the installation site does not exceed 50% when the ambient air temperature is +40°C. The relative humidity can be higher at a lower temperature. For example, when the mean minimum temperature of the wettest month is +20°C, the mean monthly maximum relative humidity of that month can reach 90%. Appropriate measures should be taken to prevent condensation due to temperature changes.
- 4 Pollution Level 3 (conductive pollution, or dry non-conductive pollution becomes conductive due to condensation). The ATS can be installed vertically or horizontally in the cabinet. If you have special installation requirements, please contact our company.
- 5 The protection level of the product shell is IP30.
- 6 Overvoltage class: III main circuit; Control and auxiliary circuits class II.
Main Technical Parameters
| Rank Current | 63 | |||||||
| Rated Work Current Ie (A) | 10A | 16A | 20A | 25A | 32A | 40A | 50A | 63A |
| Rated Insulation Voltage (Ui) | 690V | |||||||
| Rated Impulse Withstand Voltage (Uimp) | 8kV | |||||||
| Rated Work Voltage (Ue) | AC220V, AC110V | |||||||
| Rated Frequency | 50/60Hz | |||||||
| Transition Preparation Time | ≤60ms | |||||||
| Mechanical Life | ≥6000 Times | |||||||
| Electrical Life | ≥1500 Times | |||||||
| Using the Categories | AC-31B | |||||||
Structure and Mounting Dimensions
Note:
□ Tunnel terminal;
□ Terminal connection area: suitable for (1~25) mm²;
□ The wire connection screw is M5, and the torque is 3.0 N·m.
Frequently Asked Questions
Q
What is the LMS1-NJT series automatic transfer switch used for?
The LMS1-NJT series is a household automatic transfer switch (ATS) designed to detect whether the primary power supply is operating normally. When a power failure or abnormality is detected, it automatically switches to the backup power source, ensuring continuous and reliable power supply to the load.
Q
What rated current options are available for the LMS1-NJT ATS?
The LMS1-NJT series is available in the following rated current options: 10A, 16A, 20A, 25A, 32A, 40A, 50A, and 63A, making it suitable for a wide range of household and light commercial power distribution systems.
Q
Can two power lines be switched on simultaneously?
No. The LMS1-NJT ATS uses a mechanical and electrical combination interlock inside the switch. This design prevents both power lines from being connected at the same time, ensuring safe and reliable operation at all times.
Q
What are the installation and environmental requirements for the LMS1-NJT ATS?
The switch should be installed at altitudes not exceeding 2000m, in environments with temperatures between -5°C and +40°C, and with relative humidity not exceeding 50% at +40°C. It supports both vertical and horizontal installation inside a cabinet and carries an IP30 protection rating.
Q
How long is the mechanical and electrical service life of this transfer switch?
The LMS1-NJT ATS offers a mechanical life of ≥6,000 switching operations and an electrical life of ≥1,500 switching operations, providing long-term durability and reliable performance for household power transfer applications.
Q
What is the transition time when switching between power sources?
The transition preparation time of the LMS1-NJT ATS is ≤60ms. This rapid switching speed minimizes power interruption to connected devices, helping to maintain the continuity and safety of the household power supply.