ATS Controller

Model: Y-703N

Rated Voltage: AC220V

Rated Current: 3A

Match:GA/GNF/S/N/L/SA/SN/Q

Certification: CE,CB,CCC

Standard: IEC 60947-6-1

Email: sale@lvma-ele.com

Model: Y-703

Rated Voltage: AC220V

Rated Current: 3A

Match:GA/GNF/S/N/L/SA/SN/Q

Certification: CE,CB,CCC

Standard: IEC 60947-6-1

Email: sale@lvma-ele.com

Rated Voltage: AC220V

Operating Frequency: 50Hz/60Hz

Voltage measurement accuracy: ± 1%

Frequency measurement accuracy: ± 0.05 Hz

Switching time: 0.5-30s (adjustable)

Communication Interface: RS485, Ethernet (optional)

Communication Protocol: Modbus RTU, TCP/IP (optional)

Working Temperature: -10 °C-+ 60 °C

Working environment humidity: ≤90% Rh (no condensation) 

Email: sale@lvma-ele.com

Y-701B controller is an independent type ATS controller.It detects abnormal conditions ofgrid parameters(overvoltage,undervoltage,phase loss,over frequency,underfrequency,misphase sequence,etc.)and then automatically control the transferswitch (TSE)transfer according to a predetermined mode of operation to the suitablepower supply,to ensure the continuous power supply on the load side.

Rated operating voltage: AC 220V, 380V (other voltage levels can be customized)

Operating Frequency: 50Hz/60Hz

Voltage measurement accuracy: ± 1%

Frequency measurement accuracy: ± 0.05 Hz

Switching time: 0.05-5 seconds (adjustable)

Communication Interface: RS485, Ethernet (optional)

Communication Protocol: Modbus RTU, TCP/IP (optional)

Working Temperature: -20 °C-+ 60 °C

Working environment humidity: ≤90% Rh (no condensation) 

Certification: CE,CB,CCC

Standard: IEC 60947-6-1

Email: sale@lvma-ele.com

Programmable output relay capacity: 10A 277VAC passive output
                                                             10A 250VAC passive output

EMC test criteria: Complies with GB/T 14048.11-2024 and IEC/EN 60947-6-1
Outline dimension: 260mm*180mm*55mm
Pore size :167mm*236mm
Working temperature: (-20~+70)℃
Working humidity:(20~93)%RH
Storage temperature: (-30~+80)°℃
Levels of protection :IP20
Weight: About 1 kg

Dual Power Automatic Transfer Switch controller mainly monitors the voltage, frequency, phase and other parameters of the two power supplies. When a power supply is abnormal, such as over-voltage, under-voltage, lack of phase, abnormal frequency and so on, the controller can quickly detect and control the relevant switching equipment according to the preset logic and program, switch the load from the abnormal power supply to the normal power supply to ensure the continuous and stable power supply for the load.

W2,W3 Dual Power Controller is an intelligent control device for dual power automatic switching system (ATS) , which is mainly used to monitor and manage the working state of two power sources (common power supply and standby power supply) , and when the power failure to achieve automatic switching, to ensure that the continuous power supply load. Can adapt to the company's C-type, Y-type, W-type dual power supply, real-time monitoring of two power three-phase voltage, three-phase current, frequency, power and other parameters, and display it through liquid crystal display and so on.